Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
chi
New Contributor
‎05-17-2015 02:12 AM

How to convert BGP configuration to newer AOS release

Jump to solution

I am upgrading a NetVanta 3430 to AOS release R10.1.0 later. How should I make the corresponding change for the below BGP configuration?

!

router bgp 65000

  no auto-summary

  no synchronization

  bgp router-id 192.168.1.1

  network 192.168.1.0 mask 255.255.255.0

  neighbor 10.100.100.1

    no default-originate

    soft-reconfiguration inbound

    remote-as 65001

!

0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎07-09-2015 12:48 PM

Re: How to convert BGP configuration to newer AOS release

Jump to solution

chi‌:

Thank you for asking this question in the support community forum.  When upgrading AOS firmware from a version prior to 18.03.00/R10.1.0, to a version of AOS 18.03.00/R10.1.0 or later, the newer AOS version will auto-change the configuration to adhere to the new BGP commands; therefore, you do not need to change any commands manually.  Please, note, the opposite does not work (i.e. if you downgrade AOS from the current AOS BGP commands, to a version prior to 18.03.00/R10.1.0, the BGP commands will not be compatible).


Here is the Configuring BGP in AOS Releases Prior to 18.03.00/R10.1.0 guide and here is the Configuring BGP in AOS 18.03/R10.1.0 or later guide.  I hope that makes sense, but please do not hesitate to reply to this post with any additional information or questions.  I will be happy to help in any way I can.


Levi

View solution in original post

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎07-09-2015 12:48 PM

Re: How to convert BGP configuration to newer AOS release

Jump to solution

chi‌:

Thank you for asking this question in the support community forum.  When upgrading AOS firmware from a version prior to 18.03.00/R10.1.0, to a version of AOS 18.03.00/R10.1.0 or later, the newer AOS version will auto-change the configuration to adhere to the new BGP commands; therefore, you do not need to change any commands manually.  Please, note, the opposite does not work (i.e. if you downgrade AOS from the current AOS BGP commands, to a version prior to 18.03.00/R10.1.0, the BGP commands will not be compatible).


Here is the Configuring BGP in AOS Releases Prior to 18.03.00/R10.1.0 guide and here is the Configuring BGP in AOS 18.03/R10.1.0 or later guide.  I hope that makes sense, but please do not hesitate to reply to this post with any additional information or questions.  I will be happy to help in any way I can.


Levi

0 Kudos
Reply