I cannot connect to my 3448 via the GUI (web interface)

[jminor]

I have a NetVanta 3430; I cannot connect via the GUI or SSH and both appears to be configured correctly. I am however able to connect via Telnet without any problems, but again I cannot connect via the Web. I have two other NetVanta that I can connect both SSH and via the web (GUI). has anyone had this problem before? Also, is there something in the command line (CLI) I can check to see if it is configured properly?

[Anonymous · Accepted solution]

:

Thank you for asking this question in the support community.  Unfortunately, there are multiple reasons you may not be able to connect via the GUI.  First, do you know if the web interface is configured on the unit (The CLI commands are:  ip http server and username <name> password <password>)?  Next, is the firewall on, and does it allow HTTP access to the unit?  If you would like to reply to this post with a copy of the current configuration, I will be happy to review it for you (please, remember to remove any information that may be sensitive to the organization).

Here are instructions on how to access the web interface for reference:  Accessing the Web Interface in AOS

Please, do not hesitate to reply to this post with any additional questions or information.  I will be happy to help in any way I can.

Levi

[Anonymous]

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor