IP Load Sharing on 3430

[jhouse]

Hi,

I believe I've setup load sharing successfully, based on the documentation here: https://supportforums.adtran.com/docs/DOC-2286

Do this also provide automatic failover?

[Anonymous]

- Thanks for posting your question on the forum!

I would say that chances are it will only provide automatic failover in the event one of the ports on the interface ever went down. I would be able to confirm this if you post your config on the thread. Please remember to remove any sensitive information. Chances are you will probably need network monitoring to configure failover. This is especially true if the internet connections are being terminated by the NetVanta over an ethernet connection.

Thanks,

Noor

[Anonymous]

- Do you have any questions or need any further assistance regarding this subject?

Thanks,

Noor

[Anonymous]

:

I marked this post as "assumed answered," but please do not hesitate to reply if you have further questions.

Levi