Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
comake
New Contributor
‎07-07-2015 01:01 PM

NetVanta 3448 Throughput Issue

Hi, I have been testing around with a spare Netvanta 3448 to test throughput. Unfortunately, I can only seem to get about 12Mbps through it. My test set up is as follows:

Eth 0/1: 192.168.1.1

Eth 0/2: 192.168.2.1

On both Ethernet connections I have a PC (192.168.1.2, 192.168.2.2). I have made a share on one and tried moving a file to and from it. I have enabled/disabled the following from another thread:

ip ffe

no lldp send-and-receive

Unfortunately, moving a file back and forth maxes out at 12Mbps. I was hoping to be able to at least get somewhat close to the 100Mbps. Is there anything I can do to increase it? Is Windows throttling it or is there a default setting on the Netvanta for throttling?

Labels (1)
Labels
0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎07-07-2015 01:44 PM

Re: NetVanta 3448 Throughput Issue

What apps are you using to test throughput?  What is the packet type, size, etc…?  For different sized payloads you could see different types of performances.

Have you baselined a transfer between your 2 hosts without the 3448 in the middle to ensure they will move packets at higher speeds?

Are you sure your results are not 12 MB/s, instead of 12 Mb/s.  12 Mbytes/s calculates out to around 96 mbits/s, which would be about what you are looking for in throughput.

Accept as Solution Reply