QoS Map - packets matching

[routesandhops]

I have a QoS Map that shows packets matching in the 'Assign QoS-Policy to an interface' section of the QoS Map section of the web page. There are no dropped packets showing up so I'm wondering if the traffic is actually being queued.

[Anonymous · Accepted solution]

:

Thank you for asking this question in the support community.  The "matches" show that traffic is matching for that QoS Map match criteria.  However, only if the link is completely saturated, will the QoS perform actions on that matched criteria.  Do you know if the link is being completely utilized and engaging outbound QoS?

If you would like to reply and attach a copy of the configuration, as well as output from the following commands, I will be happy to review it for you:

show qos map

show qos map interface <interface>

show interface

Also, here is the Configuring QoS in AOS guide for reference.

Levi

[Anonymous]

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor