cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
New Contributor

Switching T1 NIM cards

Jump to solution

If I switch a single T1 NIM on a 3448 to a dual T1 NIM, will the programming still be applied to the first T1 interface and continue working properly

Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Contributor III
Contributor III

Re: Switching T1 NIM cards

Jump to solution

Yes.  The existing configuration will apply to the first the interface (left most port) on the dual T1 NIM.

View solution in original post

0 Kudos
2 Replies
Contributor III
Contributor III

Re: Switching T1 NIM cards

Jump to solution

Yes.  The existing configuration will apply to the first the interface (left most port) on the dual T1 NIM.

View solution in original post

0 Kudos
Anonymous
Not applicable

Re: Switching T1 NIM cards

Jump to solution

-

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor