cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
imbinary
New Contributor

Trouble removing snmp user/group

Jump to solution

I'm having trouble removing an snmp user and group.  My relative snmp config is as follows:

snmp agent

snmp-server view rrd 1.3.6.1.2.1 included

snmp-server user rrd rrdV3 v3 auth md5 XXX priv des XXX ip access-class ACL_snmp

snmp-server user rrd2 rrdV3 v3 auth md5 XXX priv des SSS ip access-class ACL_snmp

snmp-server group rrdV3 v3 auth read rrd ip access-class ACL_snmp

When I issue the no snmp-server user ... command  I get the following error.

Adtran4305(config)#no snmp-server user rrd rrdV3 v3 auth md5 XXX priv des XXX ip access-class ACL_snmp

%Could not perform operation.

any ideas on why?

Thanks

Chris

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Trouble removing snmp user/group

Jump to solution

imbinary:

I apologize for the trouble.  This problem is related to specific hardware platforms and will be fixed in the next release of firmware (R10.0.1), which is scheduled for April 2012.  Until this version of firmware is publicly available, you can workaround this by uploading a configuration with this command removed, and then rebooting the unit.

Here is the how to Upgrade Firmware in AOS document.

Please, let me know if you have any further questions on this topic.

Levi

View solution in original post

0 Kudos
4 Replies
Anonymous
Not applicable

Re: Trouble removing snmp user/group

Jump to solution

Chris:

Thank you for asking this question in the Support Community. 

Are there any additional details you can provide?  Do you know what version of firmware you are running (You can view this with the show version command)?  When I tested this command in AOS version 18.03.01.00.E, it seemed to function properly:

ROUTER-NAME(config)# do show running-config | include snmp

!

snmp agent

snmp-server view rrd 1.3.6.1.2.1 included

snmp-server user rrd rrdV3 v3 auth md5 XXX priv des XXX ip access-class acl

snmp-server user rrd2 rrdV3 v3 auth md5 XXX priv des SSS ip access-class acl

snmp-server group rrdV3 v3 auth read rrd ip access-class acl

!

ROUTER-NAME(config)# no snmp-server user rrd rrdV3 v3 auth md5 XXX priv des XXX ip access-class acl

!

ROUTER-NAME(config)# do show running-config | include snmp                                        

!

snmp agent

snmp-server view rrd 1.3.6.1.2.1 included

snmp-server user rrd2 rrdV3 v3 auth md5 XXX priv des SSS ip access-class acl

snmp-server group rrdV3 v3 auth read rrd ip access-class acl

Please, do not hesitate to reply to this post with any additional information or questions.  I will be happy to help in any way I can.

Levi

imbinary
New Contributor

Re: Trouble removing snmp user/group

Jump to solution

Levi,

     Thanks for your reply here is the firmware version I am running.

! ADTRAN, Inc. OS version 18.03.01.00

! Boot ROM version 08.02.00.XA

! Platform: NetVanta 4305, part number 1200890L2

Anonymous
Not applicable

Re: Trouble removing snmp user/group

Jump to solution

imbinary:

I apologize for the trouble.  This problem is related to specific hardware platforms and will be fixed in the next release of firmware (R10.0.1), which is scheduled for April 2012.  Until this version of firmware is publicly available, you can workaround this by uploading a configuration with this command removed, and then rebooting the unit.

Here is the how to Upgrade Firmware in AOS document.

Please, let me know if you have any further questions on this topic.

Levi

View solution in original post

0 Kudos
imbinary
New Contributor

Re: Trouble removing snmp user/group

Jump to solution

Thanks.