cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
kevinme
New Contributor

blocking ports on a 4430

Jump to solution

we recently purchased a wisp and acquired this adtran 4430 in the purchase and we are really new to adtran routers. we have just about everything else setup like we want it but just havent figured this one out. i would like to block ports 1024-65535. can someone tell me the correct procedure?

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: blocking ports on a 4430

Jump to solution

The quickest way is to login into the gui.

1. Go to "Data" then the sub-menu  "Security Zones", the click on "Public".

2. From there click on "Add Policy to Zone 'Public'". 

3. Under Policy Type, select "Filter". Then click on Continue.

From that just fill in your information.  Remember to save the config when finished.

Untitled.jpg

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: blocking ports on a 4430

Jump to solution

The quickest way is to login into the gui.

1. Go to "Data" then the sub-menu  "Security Zones", the click on "Public".

2. From there click on "Add Policy to Zone 'Public'". 

3. Under Policy Type, select "Filter". Then click on Continue.

From that just fill in your information.  Remember to save the config when finished.

Untitled.jpg

0 Kudos