BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
dewkeebo
New Contributor

Looking for definitions for IfStackstatus for Netvanta 5660 based off jwalk results example 1.3.6.1.2.1.31.1.2.1.3.3.10: 2: 1

Having issues getting a Netvanta 5660 to discover using snmp and being told that it is because of the results in the IfStackTable.

Have been told that if the 1 at the end is changed to a 0 it discovers.

Before I'm willing to make any changes I would like to know what the following results actually represent.

1.3.6.1.2.1.31.1.2.1.3.1.14:  2:  1

1.3.6.1.2.1.31.1.2.1.3.3.10:  2:  1

1.3.6.1.2.1.31.1.2.1.3.4.11:  2:  1

1.3.6.1.2.1.31.1.2.1.3.5.12:  2:  1

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Looking for definitions for IfStackstatus for Netvanta 5660 based off jwalk results example 1.3.6.1.2.1.31.1.2.1.3.3.10: 2: 1

dewkeebo‌ - Thanks for posting your question on the forum!

I would be more than happy to look into this for you. First, I want to confirm that you have downloaded the updated MIBs from the Adtran website (ADTRAN MIBs) Also, it would be helpful if we could take a look at your configuration, if you could post it to this thread. Please remember to remove any sensitive information.

Let us know if you have any questions.

Thanks,

Noor