Adtran
Help
Attention! The Adtran support community will be placed in read-only mode on Monday, January 20th, at 8 AM CST for system maintenance. During this time, new posts, replies, or other content updates will be unavailable. The system will return to normal functionality by 9 AM CST on Tuesday, January 21st. If you encounter any product issues during this read-only period, you can reach out to Adtran support at any time. Thank you!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ing_gomez_clevermx
New Contributor III
‎10-16-2014 02:26 PM

How to configure Remote Survivability on a 6355

Hello.

I have a NV6355, we are having issues with the SIP provider, I was thinking to use the feature of Remote Survivability to use a PSTN line to have my in/out bound.

As the SIP services are being hosted by the SIP provider i was wondering If i need to tell the provider to perform some changes.

Also I couldn't find enough information about Remote Survivability online.

I'll appreciate any information.

regards

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎07-10-2015 03:24 PM

Re: How to configure Remote Survivability on a 6355

Francisco,

Thanks for posting.  You will likely want to work with your provider to make any changes to call routing in the unit.  However, your unit will support survivability, and below is a link to a guide you may find helpful.  This shows the configuration of an FXO port to be used full time for 911 calls, and a backup PSTN path when the SIP server is not reachable.

Configuring TA900 Series FXO ports

Feel free to add any follow up questions you may have or additional details about your current application and the backup paths trunks you wish to incorporate.

Thanks!

David

0 Kudos
Accept as Solution Reply