cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
flash
New Contributor

SIP to BRI Netvanta 6310

Jump to solution


Hi Guys,

Good day!

We are currently having issues on our setup. Please see below sample diagram   

---SIP--> |NETVANTA6310| <---BRIx2(4channels)--->|Router|

What we are experiencing is when we have setup an outbound call (from the router), we can not perform an inbound call to the router. The netvanta is giving us the following error below. We still have 3 channels available but the netvanta 6310 is sending a "SIP 486 Busy Here" message to the sip server. Also below is the  configuration on the BRI interfaces. Any information on how to resolve this is greatly appreciated.

2014.06.18 08:04:28 ISDN.EP     BRI 1/3  Call not accepted to xxxxxxxxxx: No channel available
2014.06.18 08:04:28 TM.T02 01 IsdnTmStateOutboundDeliver - rcvd unexpected CallRelease
2014.06.18 08:04:28 TM.T02 01 IsdnTmStateIdling - clear trunk appearance


2014.06.18 08:05:15 ISDN.EP     BRI 1/3  Call not accepted to yyyyyyyyyy: No channel available
2014.06.18 08:05:15 TM.T02 01 IsdnTmStateOutboundDeliver - rcvd unexpected CallRelease
2014.06.18 08:05:15 TM.T02 01 IsdnTmStateIdling - clear trunk appearance


2014.06.18 08:05:33 ISDN.EP     BRI 1/3  Call not accepted to zzzzzzzzzz: No channel available
2014.06.18 08:05:33 TM.T02 01 IsdnTmStateOutboundDeliver - rcvd unexpected CallRelease
2014.06.18 08:05:33 TM.T02 01 IsdnTmStateIdling - clear trunk appearance

interface bri 1/3
  role network
  isdn static-tei 0
  isdn line-termination
  no shutdown
interface bri 1/4
  role network
  isdn static-tei 0
  isdn line-termination
  no shutdown


isdn-group 1
  connect bri 1/3
  connect bri 1/4

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: SIP to BRI Netvanta 6310

Jump to solution

Zandro,

Thanks for posting!  I believe I found an associated Technical Support ticket for this problem.  It appears that this issue will be resolved in R11.3.0 firmware.  If I am mistaken about matching this up to a support ticket, please let me know.

Thanks!

David

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: SIP to BRI Netvanta 6310

Jump to solution

Zandro,

Thanks for posting!  I believe I found an associated Technical Support ticket for this problem.  It appears that this issue will be resolved in R11.3.0 firmware.  If I am mistaken about matching this up to a support ticket, please let me know.

Thanks!

David

0 Kudos
flash
New Contributor

Re: SIP to BRI Netvanta 6310

Jump to solution

Hi David,

Thanks for the reply, is it possible to get the new firmware in advance so we can test it out. Our customer is experiencing this issue as we speak and would like to try it out as soon as posible. Yes, i believe we are the one who created that case. Just posted the same issue here in this forum hoping for somebody having the same issue.

Best regards

phixion
New Contributor

Re: SIP to BRI Netvanta 6310

Jump to solution

Hello,

I am wondering if someone could help me with the configuration of SIP to BRI, I cannot find a BRI configuration guide on the adtran community site, or published docs.

Thank you,