Adtran
Help
Attention! The Adtran support community will be placed in read-only mode on Monday, January 20th, at 8 AM CST for system maintenance. During this time, new posts, replies, or other content updates will be unavailable. The system will return to normal functionality by 9 AM CST on Tuesday, January 21st. If you encounter any product issues during this read-only period, you can reach out to Adtran support at any time. Thank you!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎06-29-2018 08:06 AM

Using N-Command to push firmware, then reboot.

Hi All,

So I was using N-Command to advise an Adtran to update the Firmware, then reboot.. Instead, N-Command told the 6355 to reboot first (The primary image was removed due to space issue so the Adtran went into bootstrap).

My question is that in N-Command, how can I advise it to push firmware first, then reboot second.

I hope this makes sense.

Labels (1)
Tags (1)
0 Kudos
Reply
2 Replies
packetvoice
New Contributor
‎07-06-2018 09:40 AM

Re: Using N-Command to push firmware, then reboot.

Do you have a screen shot of how you setup the job in N-command? If you used the correct order for the tasks in the job, it shouldn't have rebooted first.

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎07-11-2018 08:26 AM

Re: Using N-Command to push firmware, then reboot.

Sorry about the delay, I've attached a screenshot.2018-07-11 08_22_56-Adtran nCommandMSP-8.3.3 (11_23_15 14_19 CST) - Mozilla Firefo - __Remote.png

0 Kudos
Accept as Solution Reply