cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

bonding 8 efm t1's or 8 shdsl

Jump to solution

Will the 6310 ever be able to bond 8 t1's or 8 shdsl pairs using two quad modules?

0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Contributor
Contributor

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

It will not, EFM bonding across multiple modules is not supported in the current NV 6310 hardware.  However, 8xSHDSL bonding will be supported in the NetVanta 4660 & NetVanta 6360, scheduled for release later this year.

View solution in original post

0 Kudos
Reply
6 Replies
Highlighted
Contributor
Contributor

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

It will not, EFM bonding across multiple modules is not supported in the current NV 6310 hardware.  However, 8xSHDSL bonding will be supported in the NetVanta 4660 & NetVanta 6360, scheduled for release later this year.

View solution in original post

0 Kudos
Reply
Highlighted
New Contributor

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

Thank you very much, any idea if the 4660 & 6360 will use the same quad cards? Also will 8xT1 bonding be supported?

0 Kudos
Highlighted
Contributor
Contributor

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

Jbonner,

From what I understand, the NV 4660 & 6360 will use "new" 4x and 8x SHDSL EoX module hardware.  There's no mention of supporting the existing NV 6310/6330 EFM modules in these new products.

0 Kudos
Highlighted
Anonymous
Not applicable

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

Is there a ETA on those NV4660 or 6360 products? I am needing those features so I can prevent using two boxes at certain locations.

I have also heard they were going to support fiber ports as well which I also need to prevent a two box solution.

0 Kudos
Highlighted
Contributor
Contributor

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

The dates have slipped for both these products, but the current release date (with EoX/EFM module support) is end of Q1-2014.

0 Kudos
Highlighted
Anonymous
Not applicable

Re: bonding 8 efm t1's or 8 shdsl

Jump to solution

Great! I am needing this stuff asap. Hopefully they will have the bonded ADSL2+ and VDSL2+ modules for them as well.

0 Kudos