cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

7100/7060 R10 Release

Jump to solution

Any dates set yet for R10 release?

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: 7100/7060 R10 Release

Jump to solution

We are expecting R10.3.1 to be released this week.  I have just opened up the page.  You can go to that page and click "Receive email notifications" on the left hand side to be notified by email when we post the firmware.  You must be logged into the ADTRAN Support Community to see the "Receive email notifications" option.  This is a new feature we will be rolling out on our other products in the coming months.  Please let me know if you have any problems.

Thanks,

Matt

View solution in original post

3 Replies
Anonymous
Not applicable

Re: 7100/7060 R10 Release

Jump to solution

We are expecting R10.3.1 to be released this week.  I have just opened up the page.  You can go to that page and click "Receive email notifications" on the left hand side to be notified by email when we post the firmware.  You must be logged into the ADTRAN Support Community to see the "Receive email notifications" option.  This is a new feature we will be rolling out on our other products in the coming months.  Please let me know if you have any problems.

Thanks,

Matt

Anonymous
Not applicable

Re: 7100/7060 R10 Release

Jump to solution

This was released today.  It was announced on the page.  Here is a link to the announcement:

Thanks,
Matt

Anonymous
Not applicable

Re: 7100/7060 R10 Release

Jump to solution

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,
Matt

Message was edited by: matt - marked as assumed answered