Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎01-21-2016 08:53 AM

CLID Question

I have two 7100 connected via a sip trunk. Also there is a seperate sip trunk for incoming and outgoing calls. Some of the phones have DID numbers assigned and others don't. My questions is the phones that have DID's assigned.... When calling the other site it shows the 10 digit DID number assigned which by default is correct for external calls. Is there a way to just send the exten number over that sip trunk that connects the two 7100's and send the 10 digit DID number over the incoming and outgoing sip trunk?

Bert

Labels (1)
0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎02-15-2016 11:23 AM

Re: CLID Question

Bert, assigning a DID to a user overwrites the caller-id on all outbound calls. The better way to do this would be to have ANI substitutions on your outbound trunk to your provider that altered the caller-id only as a call left towards the PSTN. Thanks

Jay

0 Kudos
Accept as Solution Reply