Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
harleyl
New Contributor
‎03-09-2015 07:43 AM

Customer can't forward their analog FXO to their night answering service.

Customer needs to forward their main number to answering service at night. Analog trunks are set up as SLA on the 7100. When you dial the forwarding code ie. *72+answering service number, it times out and gives a busy signal.

Labels (1)
0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎05-11-2015 11:11 AM

Re: Customer can't forward their analog FXO to their night answering service.

Pat, by default the 7100 handles processing of all SPRE codes locally. You can change this under "System Parameters" by switching "SPRE Handling Mode" to Network, however that would break any local SPRE codes you use on the 7100, so there would be a trade-off in either configuration. Thanks

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎05-11-2015 11:20 AM

Re: Customer can't forward their analog FXO to their night answering service.

Pat, correction to that, you can override specific SPRE codes, but only from the CLI. The command would be "voice spre-mode override *72", which would cause that code to get processed by the network while all others are processed by locally. Thanks

0 Kudos
Accept as Solution Reply