cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
hubtech
New Contributor II

Dual ISP Connectins?

Jump to solution

Is it possible to have two ISP connections on the netvanta 7100?  Currently have a dynamic T1 and we are outgrowing the bandwidth for data and voice traffic.  I wanted to dedicate the T1 to the voice side of things and put in a high speed cable connection for data.

thanks in advance all!!!

Labels (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Dual ISP Connectins?

Jump to solution

hubtech

The NetVanta 7100 will support this setup.  You would need to configure the new Internet connection and change your static default route to point to the gateway on this new connection.  For the current Internet connection, that will just be used for voice, add static routes to the IP address ranges used by your voice service provider.

Thanks

Charles

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Dual ISP Connectins?

Jump to solution

hubtech

The NetVanta 7100 will support this setup.  You would need to configure the new Internet connection and change your static default route to point to the gateway on this new connection.  For the current Internet connection, that will just be used for voice, add static routes to the IP address ranges used by your voice service provider.

Thanks

Charles

0 Kudos
Anonymous
Not applicable

Re: Dual ISP Connectins?

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

I also wanted to link to this guide that can be used to configure failover between the two Internet connections in addition to Charles advice:

Configuring Multiple WAN Connection Failover in AOS


Thanks,

Matt