Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎02-20-2014 12:13 PM

Netvanta 7100 - troubleshooting FXS

Jump to solution

Hi,  I have a polycom soundstation 2 connected to FXS 0/1 of Netvanta 7100.  I cannot get it to break dial done.  It's like it does not understand DTMF.  Does anyone have any ideas?  I have physical interface enable, receive gain set to -3.0, transmit gain set to -6.0, Caller id 1000, Signaling type loop start, Impedance set to 600 ohm +2.16uF.

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎02-24-2014 09:41 AM

Re: Netvanta 7100 - troubleshooting FXS

Jump to solution

This may be related to the recent ticket you opened with analog line problems. If you bypass the NetVanta 7100 and plug directly into an analog line at the site does it work?  If it works plugged directly into the line from the provider but not when plugged into the NetVanta 7100 can you paste the output of a show run voice in this thread and remove any sensitive information (phone numbers, names, e-mail addresses, etc)?

Thanks,

Matt

View solution in original post

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎02-24-2014 09:41 AM

Re: Netvanta 7100 - troubleshooting FXS

Jump to solution

This may be related to the recent ticket you opened with analog line problems. If you bypass the NetVanta 7100 and plug directly into an analog line at the site does it work?  If it works plugged directly into the line from the provider but not when plugged into the NetVanta 7100 can you paste the output of a show run voice in this thread and remove any sensitive information (phone numbers, names, e-mail addresses, etc)?

Thanks,

Matt

0 Kudos
Reply