Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
rcampbe
New Contributor
‎09-13-2016 06:44 PM

Netvanta 7100 won't register phones

I have a client that has a Netvanta 7100 that the DSP failed in. I was able to download the config and upload that config to a refurb netvanta, but none of the phones get a dial tone or show that they are registered. I still have access to the bad 7100 and have looked through a good bit of the settings and put them in the new switch. What else should I be looking at? I can upload configs, debug results, etc. if someone can direct me on what to upload.

0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎09-14-2016 08:46 AM

Re: Netvanta 7100 won't register phones

Rod, did you swap the CFLASH cards after loading the new config? That's where all the phone configurations, auto-attendants, voicemails, and greetings are stored. Thanks

Jay

0 Kudos
Accept as Solution Reply
rcampbe
New Contributor
‎09-14-2016 10:52 AM

Re: Netvanta 7100 won't register phones

I did swap the CFLASH and the replacement unit does not boot with it installed. I was able to get the phones to register by deleting the users, recreating them and then factory resetting the phones. I am going to use FTP to move the files from one unit to the other.

0 Kudos
Accept as Solution Reply