BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Outgoing calls using Analog Trunks

I have 6 analog trunks divided into 2 trunk groups (3 trunks for each group). For outgoing calls, how can I get users to use specific trunks? Or is there a round-robin approach? Right now T01 is getting used the most. I wish to spread the love so to speak.

thanks

b

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Outgoing calls using Analog Trunks

The only way you can do that is configure SABR (source ani based routing). With that you can tell which user’s can use which trunk. This is an advanced configuration that is only configurable via the CLI.

We teach this in the Expert 7100 class called ATSE/UCAS

Here is config guide: https://supportforums.adtran.com/docs/DOC-1862

Let me know if you have any questions.

-Mark