cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

Paging and pre-recorded message

Jump to solution

We're using the NV7100 and I was asked about paging a pre-recorded message. Basically what they want is to setup a paging group (which we have already done) and be able to play a pre-recorded message when we page that particular group. Such as "all shop employees report to the cafeteria" when they dial 399. We are not looking at doing this with overhead paging but want to be able to do this over the phones and the message would be something like a pre-recorded wav file. Wasn't sure if this could be accomplished in the NV7100 config anywhere. Any help would be appreciated. Thanks.

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Anonymous
Not applicable

Re: Paging and pre-recorded message

Jump to solution

sschindler,

Thank you for posting your question to the ADTRAN Support Community.  Something like this may be possible by pairing the NetVanta 7100 with a NetVanta UC server (BCS setup), but the NetVanta 7100 cannot do this by itself currently.  Feel free to make a feature request for this in the area.

Thanks,

Matt

View solution in original post

0 Kudos
Reply
1 Reply
Highlighted
Anonymous
Not applicable

Re: Paging and pre-recorded message

Jump to solution

sschindler,

Thank you for posting your question to the ADTRAN Support Community.  Something like this may be possible by pairing the NetVanta 7100 with a NetVanta UC server (BCS setup), but the NetVanta 7100 cannot do this by itself currently.  Feel free to make a feature request for this in the area.

Thanks,

Matt

View solution in original post

0 Kudos
Reply