cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
frank6160
Contributor
Contributor

Phone registration issue

Jump to solution

Have a 7100  trying to get some remote sets working. 7100 is behind a 1535 which in turn is connected to a 4430 to outside world. 7100 address is 10.1.50.1, Vlan for phones is 10.10.50.1 Working with support and was told it should work.Sites are connected by VPN to 4430. Set at far end is IP address 10.1.55.25  Get the following when it trys to register:,

01:54:36.182 SIP.STACK MSG     Rx: UDP src=10.1.55.25:5060 dst=10.1.50.1:5060

01:54:36.182 SIP.STACK MSG         REGISTER sip:10.1.50.1:5060 SIP/2.0

01:54:36.182 SIP.STACK MSG         Via: SIP/2.0/UDP 10.1.55.25;branch=z9hG4bKd977a1b80224F80

01:54:36.182 SIP.STACK MSG         From: "VVX 400" <sip:VVX400@10.1.50.1>;tag=63DDF9DD-222D1CAA

01:54:36.182 SIP.STACK MSG         To: <sip:VVX400@10.1.50.1>

01:54:36.182 SIP.STACK MSG         CSeq: 1 REGISTER

01:54:36.183 SIP.STACK MSG         Call-ID: 3a9c5e69-a0f409a6-f7445647@10.1.55.25

01:54:36.183 SIP.STACK MSG         Contact: <sip:VVX400@10.1.55.25>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER"

01:54:36.183 SIP.STACK MSG         User-Agent: PolycomVVX-VVX_400-UA/4.1.4.7430

01:54:36.183 SIP.STACK MSG         Accept-Language: en

01:54:36.183 SIP.STACK MSG         Max-Forwards: 70

01:54:36.183 SIP.STACK MSG         Expires: 3600

01:54:36.184 SIP.STACK MSG         Content-Length: 0

01:54:36.184 SIP.STACK MSG

01:54:36.186 SIP.USER-REG VVX400 Registration rejected (404)

01:54:36.187 SIP.STACK MSG     Tx: UDP src=10.1.50.1:5060 dst=10.1.55.25:5060

01:54:36.187 SIP.STACK MSG         SIP/2.0 404 Not Found

01:54:36.188 SIP.STACK MSG         From: "VVX 400"<sip:VVX400@10.1.50.1>;tag=63DDF9DD-222D1CAA

01:54:36.188 SIP.STACK MSG         To: <sip:VVX400@10.1.50.1>;tag=5746480-a013201-13c4-72e54-546c55dc-72e54

01:54:36.188 SIP.STACK MSG         Call-ID: 3a9c5e69-a0f409a6-f7445647@10.1.55.25

01:54:36.188 SIP.STACK MSG         CSeq: 1 REGISTER

01:54:36.188 SIP.STACK MSG         Via: SIP/2.0/UDP 10.1.55.25;branch=z9hG4bKd977a1b80224F80

01:54:36.188 SIP.STACK MSG         Supported: 100rel,replaces

01:54:36.189 SIP.STACK MSG         Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, PRACK, REFER, REGISTER

01:54:36.189 SIP.STACK MSG         User-Agent: ADTRAN_NetVanta_7100/R10.9.3.E

01:54:36.189 SIP.STACK MSG         Content-Length: 0

01:54:36.189 SIP.STACK MSG

Labels (2)
0 Kudos
1 Solution

Accepted Solutions
jayh
Honored Contributor
Honored Contributor

Re: Phone registration issue

Jump to solution

Do you have a phone with the sip-identity "VVX400" in the system at IP 10.1.55.25?  It looks like the phone's parameters are incorrect in that it is trying to register with its model number or template. Typically endpoints register with something resembling an extension or phone number, although for security-through-obscurity purposes this can be changed.

You'll either have to change the phone's configuration file so that its identity is something unique to that phone (recommended) or program the 7100 so that one and only one phone registers with the identity of "VVX400" (which isn't likely to scale very well).

View solution in original post

0 Kudos
6 Replies
jayh
Honored Contributor
Honored Contributor

Re: Phone registration issue

Jump to solution

Do you have a phone with the sip-identity "VVX400" in the system at IP 10.1.55.25?  It looks like the phone's parameters are incorrect in that it is trying to register with its model number or template. Typically endpoints register with something resembling an extension or phone number, although for security-through-obscurity purposes this can be changed.

You'll either have to change the phone's configuration file so that its identity is something unique to that phone (recommended) or program the 7100 so that one and only one phone registers with the identity of "VVX400" (which isn't likely to scale very well).

0 Kudos

Re: Phone registration issue

Jump to solution


OK. I have set registered and now I get no audio. Either way. ????

jayh
Honored Contributor
Honored Contributor

Re: Phone registration issue

Jump to solution

Do you have no audio at all, even audio to/from the 7100 media such as voicemail greetings, etc.?  Do you hear ringback and the audio oes away when the phone is answered?  Are your VPN settings correct and the netmasks of the local and remote subnets such that they are part of the encrypted traffic and don't overlap with each other?

what changes did you make to get the phone to register? 

Re: Phone registration issue

Jump to solution

I got the audio issue fixed. Voice subnet not in far end router. I can now make extension to extension calls but when I dial an external number  it only lets 10 didgits be dialed. ie 9-678-555-228 instead of 9-678-555-2284. Polycomm VVX 400 set.

jayh
Honored Contributor
Honored Contributor

Re: Phone registration issue

Jump to solution

This is probably dialplan configuration in the Polycom.  These days the leading 9 plus second dialtone is kind of losing popularity. 

Re: Phone registration issue

Jump to solution

Changed the dial plan user couldn't dial anything. Set back to default and all is well.