Setting up VVX600 camera phones with NetVanta 7100

[vmirinav]

I was wondering how I would go about setting up VVX600 camera phones with NetVanta 7100. When I plug them in they fail to get DHCP from my demo server, the laptop gets DHCP just fine.

I got the phone directly from Adtran reseller and the say Adtran on them.

server version is R10.8.0.E

Regards,

Vito

[jayh]

Are you operating a separate voice VLAN?  Check your LLDP settings to make sure that the phone is on the same VLAN as your DHCP server for the voice subnet.  If the phones have been previously configured they may have a voice VLAN configured on the phone itself that you'll need to remove.

If you plug the laptop in behind the phone does the laptop still get a DHCP address? 

[vmirinav]

Thank you. I set ID to 2 now I think they are coming up and asking to login now.

[vmirinav]

Still the phone on 7100 shows as vvx500 for some reason not 600 and still asks to login. It does not register.

[vmirinav]

ok it works just had to fiddle around a bit

[vmirinav]

How would I enable video on VVX600 phones with the camera?

[Anonymous · Accepted solution]

We are working this issue from a support ticket, but the phones will require version 4.1.3, which is currently available from Polycom's website: http://support.polycom.com/PolycomService/support/us/support/voice/business_media_phones/VVX_Camera....

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Matt