cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

SpectaLink 8400 is not finding configuration files with NV 7100

I am trying to set up a SpectraLink 8400 wireless phone off of a 7100, but the phone is displaying URL calling disabled. Do I need to create the config files manually?

The 8400 is telling me this in the log:

1112125248|copy |*|00|Server 'x.x.x.1' said '00907a1396b5-phone.cfg' is not present

1112125248|copy |*|00|Server 'x.x.x.1' said '00907a1396b5-web.cfg' is not present

1112125248|copy |*|00|Server 'x.x.x.1' said '000000000000-license.cfg' is not present

1112125248|copy |*|00|Server 'x.x.x.1' said '00907a1396b5-license.cfg' is not present


It is connected to an Aruba WAP, connected to a 7100.


Important part of the Aruba config:


wlan ssid-profile cordless

index 1

type voice

essid cordless

wpa-passphrase 0b628d2381cbb60696547973931a7bb4bc44b686bd96ed8a

opmode wpa-psk-tkip,wpa2-psk-aes

max-authentication-failures 0

vlan 2

rf-band all

captive-portal disable

dtim-period 1

inactivity-timeout 1000

broadcast-filter none

blacklist


From the Netvanta the DHCP pool is set up similar to this (this is from the Adtran guide):


ip dhcp-server pool "VoIP_pool"

  network 10.10.20.0 255.255.255.0

  dns-server 10.10.20.1

  netbios-node-type h-node

  default-router 10.10.20.1

  tftp-server tftp://10.10.20.1

  ntp-server 10.10.20.1

  timezone-offset -6:00

  option 157 ascii

TftpServers=0.0.0.0,FtpServer

s=10.10.20.1:/ADTRAN,FtpLogin=polycomftp,FtpPassword=pass

word,Layer2Tagging=True,VlanID=2


0 Kudos
1 Reply
Highlighted
Valued Contributor
Valued Contributor

Re: SpectaLink 8400 is not finding configuration files with NV 7100

Aaron, you would need to create the files manually or manually configure the phone. Spectralink phones are not officially supported on the 7100 and as such, the 7100 can't generate config files for it. THanks

Jay