cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Upgrading Netvanta 7100 from to A4.03.00.SC.E

Jump to solution

Hi,  I want to upgrade a Netvanta 7100 from A4.03.00.SC.E to the latest version.  Going through the release notes, it states minimum Boot Rom needs to be A2.06.B1.01.

It also states Adtran 706/712 - needs to be bootrom 2.1.0 and minimum software needs to be R2.3.0

Polycom needs to be software 3.2.7 and bootrom needs to be 4.1.2b

How do I find out what software and bootroom I'm running on the phones?

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Upgrading Netvanta 7100 from to A4.03.00.SC.E

Jump to solution

The output of a show version and a show sip user-registration user-agent will tell you everything except the bootrom on the phones.  Here is some sample output with the firmware version information highlighted:


7100#show version


ADTRAN, Inc. OS version R10.10.0.E


  Mainline Version: ENM.13.132


  P4 Changelist: 108701


  Checksum: CFF1F33B


  Built on: Mon Nov 18 17:54:59 2013


  Upgrade key: edc900871c8c53c5e5784f09b807fe11


Hardware version 10A


Boot ROM version A2.06.B1.01


  Checksum: E282


  Built on: Wed Mar 03 13:32:03 2010


Copyright (c) 1999-2013, ADTRAN, Inc.


Platform: NetVanta 7100, part number 1200796E1


Serial number LBADTNXXXXXXXXX


Flash: 33554432 bytes  DRAM: 134217728 bytes



7100 uptime is 4 weeks, 3 days, 23 hours, 57 minutes, 0 seconds



slot 0, DSP 1


  DSP software version: G2.R10.8.M.4b


  DSP hardware version: Freescale MSC7119


  Total channels: 30



System returned to ROM by Warm Start


Current system image file is "CFLASH:/NV7100A-R10-10-0-E.biz"


Primary boot system image file is "CFLASH:/NV7100A-R10-10-0-E.biz"


Backup boot system image file is "CFLASH:/NV7100A-R10-10-M-2-E.biz"


Primary system configuration file is "startup-config"




7100#show sip user-registration user-agent


User                 User-Agent


-------------------- ----------------------------------------------------------


2007                 Adtran-SIP-IP706/v2.4.0.3


2010                 PolycomSoundPointIP-SPIP_601-UA/3.1.3.0439_0004f2112233


2040                 Adtran-SIP-IP706/v2.4.0.3



Total phones registered: 3



It may be best to check the bootrom on phones from the display, one of each model.  For a Polycom go to Menu > Status > Platform > Phone and scroll down until you see BootROM.  For an ADTRAN IP 707/712 go to Menu > Phone Status > Firmware Ver.

Thanks,

Matt

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Upgrading Netvanta 7100 from to A4.03.00.SC.E

Jump to solution

The output of a show version and a show sip user-registration user-agent will tell you everything except the bootrom on the phones.  Here is some sample output with the firmware version information highlighted:


7100#show version


ADTRAN, Inc. OS version R10.10.0.E


  Mainline Version: ENM.13.132


  P4 Changelist: 108701


  Checksum: CFF1F33B


  Built on: Mon Nov 18 17:54:59 2013


  Upgrade key: edc900871c8c53c5e5784f09b807fe11


Hardware version 10A


Boot ROM version A2.06.B1.01


  Checksum: E282


  Built on: Wed Mar 03 13:32:03 2010


Copyright (c) 1999-2013, ADTRAN, Inc.


Platform: NetVanta 7100, part number 1200796E1


Serial number LBADTNXXXXXXXXX


Flash: 33554432 bytes  DRAM: 134217728 bytes



7100 uptime is 4 weeks, 3 days, 23 hours, 57 minutes, 0 seconds



slot 0, DSP 1


  DSP software version: G2.R10.8.M.4b


  DSP hardware version: Freescale MSC7119


  Total channels: 30



System returned to ROM by Warm Start


Current system image file is "CFLASH:/NV7100A-R10-10-0-E.biz"


Primary boot system image file is "CFLASH:/NV7100A-R10-10-0-E.biz"


Backup boot system image file is "CFLASH:/NV7100A-R10-10-M-2-E.biz"


Primary system configuration file is "startup-config"




7100#show sip user-registration user-agent


User                 User-Agent


-------------------- ----------------------------------------------------------


2007                 Adtran-SIP-IP706/v2.4.0.3


2010                 PolycomSoundPointIP-SPIP_601-UA/3.1.3.0439_0004f2112233


2040                 Adtran-SIP-IP706/v2.4.0.3



Total phones registered: 3



It may be best to check the bootrom on phones from the display, one of each model.  For a Polycom go to Menu > Status > Platform > Phone and scroll down until you see BootROM.  For an ADTRAN IP 707/712 go to Menu > Phone Status > Firmware Ver.

Thanks,

Matt

0 Kudos