cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
frank6160
Contributor
Contributor

sync dropped error

Jump to solution

When connected to the console port I see  2012.04.10 12:39:26 VOICE.Analog Driver 2.1 Sync dropped repeated many times. What is this indicating?

0 Kudos
1 Solution

Accepted Solutions

Re: sync dropped error

Jump to solution

Seems to have cleared upnow that system is on site and connected to Telco. Must have been issue with PRI test set I was using. I had never had an issue using it the same way before.

View solution in original post

0 Kudos
4 Replies
Anonymous
Not applicable

Re: sync dropped error

Jump to solution

I saw that you created a support ticket for this.  It would be best if you continue to work with Support on this issue under the ticket you have open.  Once the issue is resolved please come back to this thread to post the solution so others can benefit from it.


Thanks,

Matt

Re: sync dropped error

Jump to solution

Seems to have cleared upnow that system is on site and connected to Telco. Must have been issue with PRI test set I was using. I had never had an issue using it the same way before.

0 Kudos
Anonymous
Not applicable

Re: sync dropped error

Jump to solution

I am getting this same error repeatedly on a NV6355 with the fxs module. This is the second unit I have seen this on. On the first one, which I RMA'd, the line would occasionally not pull dial tone. When I replaced the FXS card it made no difference. Now that I am getting this again on a brand new box and card, I am kind of suspicious. I am not using a PRI. This problem persisted from an upgrade from R10.6 to R10.9. Any ideas?

  1. 2013.12.17 16:32:19 VOICE.Analog Driver 1.1 Sync dropped.
  2. 2013.12.17 16:33:10 VOICE.Analog Driver 1.1 Sync dropped.
Anonymous
Not applicable

Re: sync dropped error

Jump to solution

This error is usually caused by an unstable clock source.  If that has been thoroughly investigated and the problem continues I would recommend opening a ticket with ADTRAN support.

Thanks,

Matt