cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
philr
New Contributor

TSU 600e Setup

Hello All,

 

Please accept my humble apologies for what I feel should be a relatively easy task but I have no experience with this product as of today.  I have an IP based communications system that transmits audio over AES67 and I am being tasked with integrating with another companies T1 infrastructure.  To do this I have purchased an interface that converts my AES signal to an analogue signal and can handle 6 channels.  From here, I go to three separate (but identical) interfaces that allow my to transmit over VoIP or ISDN.  The company is asking that I go out over ISDN.  Eventually I need to get to their Canoga Perkins T1 interface which has one Network Port that I believe goes to the Network Port on the TSU 600e with a T1 crossover cable. 

 

From each of my ISDN ports, I assume I go to 3 of the Dual E&M ports again with a T1 line.  There is also a Quad FXS module on this item.  Any help would be greatly appreciated.

0 Kudos