cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

TSU600 BOOTREV version change

We currently have two TSU600 in our live system setup, and two older unused TSU600s. The live systems use REV V BOOTREV D, and the unused have REV V BOOTREV A. Is there a simple process to change our older TSU's to our live REV V BOOTREV D... i.e. can I just upload/download the BOOTREV D from the "Chain-in" port? Do I need specific software... Will T-Watch Pro work? I saw the pin-out for the custom serial to RJ-45 in an older post.

0 Kudos
1 Reply
Valued Contributor
Valued Contributor

Re: TSU600 BOOTREV version change

Thank you for your question.

Unfortunately, the BOOTREV on the TSU600s is an EPROM chip, and cannot be flashed. The chip has to be replaced. However, I don't believe you'll have any issues running BOOTREV A.

Thank you,

Patrick

0 Kudos