I know this will be something silly but...
I'm setting up my fax machines on FXS 0/1-8
When inbound number is called it rings and answers fine, two way audio is good.
When dialing an external number, the ISDN debug says "PRI 1 Send last 4 digits of" and it only dials the last 4 digits of the number dialed and routes it back to my PBX (Mitel) instead of the outside world.
Here is the voice config:
!
voice international-prefix abbreviated
!
voice feature-mode network
voice forward-mode network
!
!
voice timeouts named-digit-timeout ext-3-sec 3
!
voice dial-plan 1 local NXX-NXX-XXXX ext-3-sec
voice dial-plan 2 extensions 41XX
voice dial-plan 3 local 1-NXX-NXX-XXXX
!
!
voice codec-list G711_List
codec g729
codec g711alaw
codec g711ulaw
!
voice trunk T01 type sip
description "SIP"
match dnis "XNXX-NXX-XXXX" substitute "011XNXX-NXX-XXXX" name "E164"
match ani "NXX-NXX-XXXX" substitute "828-blah-blah"
match ani "$" substitute "828-blah-blah"
sip-server primary us-east-va.sip.blah.com
domain "sip.blah.com"
max-number-calls 23
codec-list G711_List both
authentication username "user" password encrypted "2345345435359c79e5b0172a3e9162d35"
!
voice trunk T02 type sip
description "3CX"
sip-server primary 10.10.13.190
registrar primary 10.10.13.190
codec-list G711_List both
!
voice trunk T03 type isdn
description "Mitel"
resource-selection linear ascending
connect isdn-group 1
rtp delay-mode adaptive
codec-list G711_List
!
!
voice grouped-trunk PRI
trunk T03
accept NXX-NXX-XXXX cost 0
accept 1-NXX-NXX-XXXX cost 0
accept 1-800-NXX-XXXX cost 0
accept 1-888-NXX-XXXX cost 0
accept 1-877-NXX-XXXX cost 0
accept 1-866-NXX-XXXX cost 0
accept 1-855-NXX-XXXX cost 0
accept 911 cost 0
accept 0-NXX-NXX-XXXX cost 0
reject NXX-976-XXXX
reject 1-900-NXX-XXXX
reject 1-976-NXX-XXXX
reject 1-NXX-976-XXXX
!
!
voice grouped-trunk SIP
trunk T01
accept $ cost 0
accept NXX-NXX-XXXX cost 0
accept 1-NXX-NXX-XXXX cost 0
accept 1-800-NXX-XXXX cost 0
accept 1-888-NXX-XXXX cost 0
accept 1-877-NXX-XXXX cost 0
accept 1-866-NXX-XXXX cost 0
accept 1-855-NXX-XXXX cost 0
accept 911 cost 0
accept 0-NXX-NXX-XXXX cost 0
reject 1-NXX-976-XXXX
reject NXX-976-XXXX
reject 1-900-NXX-XXXX
reject 1-976-NXX-XXXX
!
!
voice grouped-trunk 3CX
trunk T02
accept 1-828-000-0000 cost 0
accept NXX-NXX-XXXX cost 0
accept 1-NXX-NXX-XXXX cost 0
accept 1-800-NXX-XXXX cost 0
accept 1-888-NXX-XXXX cost 0
accept 1-877-NXX-XXXX cost 0
accept 1-866-NXX-XXXX cost 0
accept 1-855-NXX-XXXX cost 0
accept 911 cost 0
accept 0-NXX-NXX-XXXX cost 0
reject NXX-976-XXXX
reject 1-900-NXX-XXXX
reject 1-976-NXX-XXXX
reject 1-NXX-976-XXXX
!
!
voice user 1111111111
connect fxs 0/3
no cos
first-name "Small Conf Room "
last-name "Fax"
password encrypted "1d19ceda69a42a9bef9c14274072fd1ae35b"
sip-identity 1111111111 T01 register auth-name "username" password encrypted "35396da3453453450089ad66bc6f99f"
sip-authentication password encrypted "353137ad173453453453266d6bc6f99f"
t38
codec-list G711_List
dnis-digits 10
!
!
!
voice user 9001
connect fxs 0/2
no cos
first-name "Adtran"
last-name "FXS 2"
password encrypted "42464cc345345345f6f3a94425d4e9e"
sip-identity 9001 T02 register auth-name "9001" password encrypted "32385f235434534578a14c8bdecbb626b8"
sip-authentication password encrypted "1d19ceda634534534514274072fd1ae35b"
t38
codec-list G711_List
!
end
I figure I'm missing something in the dial plans. Thoughts?
