cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

ADTRAN TA908e 3rd Gen SIP Proxy

We recently attempted to configure an ADTRAN TA908e to be a SIP proxy for our Metaswitch in order to use for SIP failover over a PRI.  We had tested this in the lab and have deployed at a separate customer site with success. However, in this most recent deployment, after configuring the SIP proxy and rebooting all the phones (200+) we noticed that some of the phones wouldn't register. After some digging we noticed that a registration had been hit for those lines on the Metaswitch.  We increased the registration limit on the Metaswitch, but noticed that the SIP registrations continued to climb even though the phones were not being rebooted.  Has anyone run into anything like this?  It sounds like a bug to me and we are currently try to duplicate it in the lab, but thought I'd ask here as well.

Thanks

Labels (3)
0 Kudos
Reply
1 Reply
Highlighted
Valued Contributor
Valued Contributor

Re: ADTRAN TA908e 3rd Gen SIP Proxy

Michael, the SIP proxy on the TA900 series doesn't generate messages on its own, it just passes them through. I would suggest opening a ticket with Tech Support for more thorough troubleshooting. Thanks

Jay

0 Kudos
Reply