cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

ANI on PRI side of Adtran does not show up

ANI shows up on SIP trunk but the PBX connected to PRI side of Adtran does not seem to receive the ANI. Where could be the problem?

My Setup is as follows:

TA908e

Voip SIP trunk

t 0/1 - Disabled

t 0/2 - Disabled

t 0/3 - Enabled - PRI (Wink)

t 0/4 - Enabled - PRI (Wink)

Any suggestions?

Tags (3)
0 Kudos
1 Reply
Anonymous
Not applicable

Re: ANI on PRI side of Adtran does not show up

Hello Deepak,

Caller ID is only supported on Feature Group D (FGD) CAS E&M Trunks.  It is not available for Wink or Immediate.  On a FGD Trunk, The calling (ANI) and called party (DNIS) numbers both appear in DTMF format:      *ANI*DNIS*

Regards,

Geoff