Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎05-08-2015 10:42 AM

ANI on PRI side of Adtran does not show up

ANI shows up on SIP trunk but the PBX connected to PRI side of Adtran does not seem to receive the ANI. Where could be the problem?

My Setup is as follows:

TA908e

Voip SIP trunk

t 0/1 - Disabled

t 0/2 - Disabled

t 0/3 - Enabled - PRI (Wink)

t 0/4 - Enabled - PRI (Wink)

Any suggestions?

Tags (3)
0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎05-15-2015 01:05 PM

Re: ANI on PRI side of Adtran does not show up

Hello Deepak,

Caller ID is only supported on Feature Group D (FGD) CAS E&M Trunks.  It is not available for Wink or Immediate.  On a FGD Trunk, The calling (ANI) and called party (DNIS) numbers both appear in DTMF format:      *ANI*DNIS*

Regards,

Geoff

Accept as Solution Reply