Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎05-08-2015 10:42 AM

ANI on PRI side of Adtran does not show up

ANI shows up on SIP trunk but the PBX connected to PRI side of Adtran does not seem to receive the ANI. Where could be the problem?

My Setup is as follows:

TA908e

Voip SIP trunk

t 0/1 - Disabled

t 0/2 - Disabled

t 0/3 - Enabled - PRI (Wink)

t 0/4 - Enabled - PRI (Wink)

Any suggestions?

Tags (3)
0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎05-15-2015 01:05 PM

Re: ANI on PRI side of Adtran does not show up

Hello Deepak,

Caller ID is only supported on Feature Group D (FGD) CAS E&M Trunks.  It is not available for Wink or Immediate.  On a FGD Trunk, The calling (ANI) and called party (DNIS) numbers both appear in DTMF format:      *ANI*DNIS*

Regards,

Geoff

Accept as Solution Reply