cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

Details on the show memory heap command

I was wondering if someone had some insight into the command "show memory heap" in an Adtran 908e. Here is a sample output from my lab device:

Memory Heap:

  HeapFree:  394096640

  HeapSize:  509648896

Block Managers:

  Mgr         Size        Used        Free    Max-Used    Overhead

           (bytes)    (blocks)    (blocks)    (blocks)     (bytes)

  0              0           2          10          12         384

  1             32       49033       12282       61315     1962080

  2             96        2885        1002        3887      124384

  3            224        2757         251        3008       96256

  4            480         828         481        1309       41888

  5            992         592          15         607       19424

  6           2016         633          75         708       22656

  7           4064          46          10          56        1792

  8           8160          48           7          55        1760

  9          16352          22           6          28         896

  10         32736           6           1           7         224

  11         65504           5           1           6         192

  12        131040           4           0           4         128

  13        262112           8           0           8         256

  14        524256           2           0           2          64

  15       1048544           1           0           1          32

  16       2097120           0           0           0           0

  17       4194272           0           0           0           0

  18       8388576           1           0           1          32

  19      16777184           0           0           0           0

  Total Overhead (bytes):    2272448

  Total Used (bytes):       19293408

  Total Free (bytes):        1236512

The way I understand this is that there is about 375 MB of free space on the heap in this box (394096640/1024/1024 = 375.8). Things that would be recorded to the heap are: rtp quality-monitoring stats, voice call history, voice quality-stats, and things of that nature. What I'm not sure about is this block manager section. My assumption is that this is representing the memory stack that is only available to core processes that are displayed with the "show processes stack" command. If this is correct it makes sense to me, with one exception: I have two boxes that I am comparing right now and one of them shows 1236512 bytes free and the other shows 11854528 bytes free, which is a significant difference. They are both running the same R11.10.0.E OS but differ in boot rom, one is R10.9.3.B1 and the other is R10.9.3.B2. Is it that the boot rom allocates more memory to the stack in R10.9.3.B2 than in R10.9.3.B1? Or is it that the boxes are capable of dynamically allocating more memory to the stack if the stack gets too low? Or am I just way off in left field here?

This is all stemming because I want to ensure that I do not over-tax the box if I set the following:

     voice quality-stats history max-streams 2000

     voice call-history-depth 1000

     ip rtp quality-monitoring history max-streams 2000

as well as use packet-capture, exporting through TFTP, on the box for the first week of a new customer turn-up

Hopefully my questions are intelligible and will be useful to someone else out there as well.

Labels (2)
0 Kudos
Reply
1 Reply
Highlighted
Valued Contributor
Valued Contributor

Re: Details on the show memory heap command

Daniel, we don't have any customer facing documentation explaining the block manager portion of that command, but for the most part it's really not relevant to an end user. The most important thing to watch would be "HeapFree", which shows the amount of memory available on the unit.

In terms of the settings, you shouldn't have any issues with those on a 3rd gen 908 like the one you got your output from.

Thanks

Jay

0 Kudos
Reply