BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

FXS auto-answer configuration

Jump to solution

I'm working on a TA 924e. How do I configure an FXS port to auto-answer? I'm running the FXS ports to wall intercoms. However, they're connected to a sip-identity and will be dialed from an IP/SIP phone not connected to the Adtran.

Current config:

voice dial-plan 6 local 1006

!

!

voice trunk T09 type sip

  sip-server primary reg.server.com

!

!

voice grouped-trunk VOICETRUNK

  no description

  trunk T09

  accept $ cost 0

!

!

voice user 1009

  connect fxs 0/1

  password "1234"

  sip-identity xyz T09 register auth-name "xyz" password "abc"

Labels (3)
Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: FXS auto-answer configuration

Jump to solution

Adtran support:

FXS ports cannot auto-answer because the hook switch is on the device that is connected to the port.  The only way to auto-answer off an FXS port would be to have a device that will automatically go off hook when it detects ring voltage.

I thought I had seen on a Linksys PAP2T's that you could setup auto-answer which fulfills the same application seen in the configuration posted, however, I verified that it is indeed not possible as adtran support states above.

Thanks!

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: FXS auto-answer configuration

Jump to solution

Adtran support:

FXS ports cannot auto-answer because the hook switch is on the device that is connected to the port.  The only way to auto-answer off an FXS port would be to have a device that will automatically go off hook when it detects ring voltage.

I thought I had seen on a Linksys PAP2T's that you could setup auto-answer which fulfills the same application seen in the configuration posted, however, I verified that it is indeed not possible as adtran support states above.

Thanks!

0 Kudos