cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jayh
Honored Contributor
Honored Contributor

Feature request - Allow crypto and VRF at the same time

Jump to solution

Feature requests aren't set up for this platform in the forum, so here goes.

Presently, when one enables a VRF on the TA900 platform, crypto is disabled and vice-versa.

It is very useful to have both VRF and crypto in mixed MPLS/VPN scenarios.  Please consider removing the restriction to allow both in the same configuration.

Labels (3)
Tags (4)
0 Kudos
1 Solution

Accepted Solutions
david
Valued Contributor
Valued Contributor

Re: Feature request - Allow crypto and VRF at the same time

Jump to solution

Jay,

Thanks for posting.  What firmware are you using and how can we duplicate this issue?  Please send us "show run", "show ver", and the CLI commands being entered.

Thanks!

David

View solution in original post

0 Kudos
2 Replies
david
Valued Contributor
Valued Contributor

Re: Feature request - Allow crypto and VRF at the same time

Jump to solution

Jay,

Thanks for posting.  What firmware are you using and how can we duplicate this issue?  Please send us "show run", "show ver", and the CLI commands being entered.

Thanks!

David

View solution in original post

0 Kudos
jayh
Honored Contributor
Honored Contributor

Re: Feature request - Allow crypto and VRF at the same time

Jump to solution

Well this is embarrassing!  I tried to duplicate the issue and it looks like both VRF and IPSec are now allowed in the same configuration.  To be honest the last time I tried to deploy this was over a year ago, probably with A5.03 or thereabouts.  I'm usually pretty diligent about reading release notes but I may have missed this or Adtran sneaked it in quietly.