The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
apenichet
New Contributor III

GUI ISSUE after R10.5.3

Jump to solution

Has anyone heard of any updates on when we will get back the Voice capabilities in the GUI of the Adtran IAD. This includes the RTP monitoring for MOS scores etc.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: GUI ISSUE after R10.5.3

Jump to solution

For that try pressing Ctrl + F5 in your browser.

View solution in original post

0 Kudos
8 Replies
jayh
Honored Contributor
Honored Contributor

Re: GUI ISSUE after R10.3

Jump to solution

No such issues with R10.5.3.  Which version of R10.3 ?  R10.3.[what?]

apenichet
New Contributor III

Re: GUI ISSUE after R10.3

Jump to solution

I meant: R10.5.3..... The Voice Options in the GUI are no longer there.

apenichet
New Contributor III

Re: GUI ISSUE after R10.3

Jump to solution

Image with Voice Options before R10.5.3 adtrancapture.JPG

apenichet
New Contributor III

Re: GUI ISSUE after R10.3

Jump to solution

And after that upgrade no more voice option below.

Capture.JPG

Anonymous
Not applicable

Re: GUI ISSUE after R10.5.3

Jump to solution

The R10.5.3 has a lot of GUI issues.

On the NetVanta 6240 it doesn’t have a way to setup a PRI in the GUI.

Anonymous
Not applicable

Re: GUI ISSUE after R10.5.3

Jump to solution

For that try pressing Ctrl + F5 in your browser.

0 Kudos
apenichet
New Contributor III

Re: GUI ISSUE after R10.5.3

Jump to solution

This one worked...

apenichet
New Contributor III

Re: GUI ISSUE after R10.5.3

Jump to solution

Adtran tech couldnt even give me that hint..... Thanks alot.