I'm trying to get a TA924e configured for just a basic setup up of MGCP with 24fxs lines. I have the MGCP in AOS PDF and have most of the MGCP configured. But what I'm needing help with is how to provision the Int ETH 0/1 which is what my outbound connection to my (Nortel/Ribbon CS1500) Softswitch. What all needs to be configured on this int? I've also got a subinterface of eth 0/1.766 which is my vlan connected to my Cisco voice stack, which is connected to my Softswitch. My local MGCP IP is 10.110.32.17. We have thousands of MGCP GW's going to FTTH ONT's, I'm in the same Vlan 766 that is working in the wild. But I can never get any communication between my 924e and Softswitch. I'm missing some provisioning on my int eth 0/1, but don't know what it is? I've attached my current running config from my 924e. Any help would be greatly appreciated!
