cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
b1naryman
New Contributor

How do enable no shut on the ethernet interface?

Current status is down and I get no link lights with a standard or x-over cable. The IP is set in the config

Labels (1)
Tags (1)
0 Kudos
2 Replies

Re: How do enable no shut on the ethernet interface?

Never mind, I figured it out.

Anonymous
Not applicable

Re: How do enable no shut on the ethernet interface?

B1naryman,

So that we have the information for anyone else searching the issue, I'll go ahead and post the commands below.

enable

(password)

config t

interface eth 0/1

no shutdown

end

wr

Thanks for posting.  If you have any other questions, please feel free to add a reply.

David