cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

NTP on TA9XX

Jump to solution

What are the steps for configuring the TA9XX series units to look at a NTP server for their date/time setting?

Tags (5)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Honored Contributor
Honored Contributor

Re: NTP on TA9XX

Jump to solution

config t

  ntp server w.x.y.z (IPv4 address) - repeat if more than one

  ! and/or

  ntp server X:X:X:X::X (IPv6 address) - repeat if more than one

  clock timezone [offset from GMT]

write mem

To verify,

show ntp status

show ntp associations

(may take a few minutes to settle)

show clock

View solution in original post

0 Kudos
2 Replies
Highlighted
Honored Contributor
Honored Contributor

Re: NTP on TA9XX

Jump to solution

config t

  ntp server w.x.y.z (IPv4 address) - repeat if more than one

  ! and/or

  ntp server X:X:X:X::X (IPv6 address) - repeat if more than one

  clock timezone [offset from GMT]

write mem

To verify,

show ntp status

show ntp associations

(may take a few minutes to settle)

show clock

View solution in original post

0 Kudos
Highlighted
Anonymous
Not applicable

Re: NTP on TA9XX

Jump to solution

Hello,

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily.  If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the

applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Regards,

Geoff