Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jwkucera
New Contributor
‎10-10-2023 01:45 PM

Newb erased file system 900e unable to access eth 0/1

Hello all,

I'm playing around with some of our 900e equipment and getting started with learning about what to do and what not to do. I've managed to erase the file system so I'm only able to get to the bootstrap# using putty.

I've got firmware to update the 900e and I've used tftp on other Adtran devices with no issues but I'm unable to connect with this one. I'm not getting any signal lights on either ETH 1 or 2 when connected.

Any ideas how to get started? I see that 10.10.10.1 should be the devices IP and I've set my computer's ethernet adapter to 10.10.10.5 but I'm getting nothing. I've tried a few other IP addresses as well. It's really bugging me that I can't get the status lights to blink... What am I missing?

0 Kudos
Reply