Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
bbranch77
New Contributor
‎11-06-2014 11:19 AM

TA916E is not responding to DS1 oid.

I'm trying to get t1 stats using the Adtran DS1 MIB.  None of the Ta916's we have are responding to the oid in the AD MGMT chain.

I've tried to snmpwalk based on the oid of 1.3.6.1.4.1.664.2.3 and get no response.

Anyone know if there is a specific setting on the router that needs to be enabled?

According to the documentation the DS1-MIB is supported by the TA916 series so I'm kinda loss as to why I'm not getting a response.

Labels (1)
0 Kudos
Reply
2 Replies
jayh
Honored Contributor
Honored Contributor
‎11-06-2014 01:36 PM

Re: TA916E is not responding to DS1 oid.

Try just "interfaces" in your snmpwalk instead of the OID.  If you don't have the standard MIBs installed in your SNMP server, you should find the interfaces here:  1.3.6.1.4.1.664.5.53.2.1.3


0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎05-19-2015 08:25 AM

Re: TA916E is not responding to DS1 oid.

Billy,

I just wanted to check back in with you on this post.  Were you able to find a way to walk the interfaces with SNMP?  Typically just the standard MIBs will work for this.

Thanks!

David

0 Kudos
Accept as Solution Reply