cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
walter8d
New Contributor

TA924: Continuous VOICE.Analog Driver 0.1 Clock dropped message

Jump to solution

I have a first gen TA924 with the newest firmware. I deleted the startup configuration and rebooted, and once the boot process was finished, the console port was constantly streaming these two errors

2013.06.06 20:50:35 VOICE.Analog Driver 0.1 Sync dropped.

2013.06.06 20:50:35 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:35 VOICE.Analog Driver 0.1 Sync dropped.

2013.06.06 20:50:35 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:35 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:35 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

2013.06.06 20:50:36 VOICE.Analog Driver 0.1 Clock dropped.

I rebooted once and it continued. After a second reboot, it quit happening and hasn't happened since. Any ideas on what this could be? Thanks

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
david
Valued Contributor
Valued Contributor

Re: TA924: Continuous VOICE.Analog Driver 0.1 Clock dropped message

Jump to solution

Walter,

Thanks for posting.  If you see these types of errors again, you should open a ticket with ADTRAN Technical Support by calling 888-423-8726.  They can help you determine if the unit is in need of repair.

Thanks!

David

View solution in original post

0 Kudos
2 Replies
david
Valued Contributor
Valued Contributor

Re: TA924: Continuous VOICE.Analog Driver 0.1 Clock dropped message

Jump to solution

Walter,

Thanks for posting.  If you see these types of errors again, you should open a ticket with ADTRAN Technical Support by calling 888-423-8726.  They can help you determine if the unit is in need of repair.

Thanks!

David

View solution in original post

0 Kudos
david
Valued Contributor
Valued Contributor

Re: TA924: Continuous VOICE.Analog Driver 0.1 Clock dropped message

Jump to solution

Walter,

I went ahead and marked the correct answer above, but feel free to add any updates you may have.

Thanks!

David