cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

Test a PRI status, send email fi down

Is there a way to probe / test a T!/PRI so if it is DOWN we send a message out (tcl script)
The question is how to determine the status of a PRI and send a message

Labels (1)
0 Kudos
Reply
3 Replies
Highlighted
Honored Contributor
Honored Contributor

Re: Test a PRI status, send email fi down

I'd read through this document: https://supportforums.adtran.com/docs/DOC-1646

See page 28 for monitoring interface state, use interface PRI 1 in your case.

0 Kudos
Reply
Highlighted
New Contributor

Re: Test a PRI status, send email fi down

I must be dense, just not seeing the solution.
Most of the probes are host/ip
Guess Ill be looking at snmp state to probe

0 Kudos
Reply
Highlighted
Honored Contributor
Honored Contributor

Re: Test a PRI status, send email fi down

capepete wrote:

I must be dense, just not seeing the solution.
Most of the probes are host/ip
Guess Ill be looking at snmp state to probe

Try:

track test if interface pri 1 line-protocol

0 Kudos
Reply