Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
vuppandm
New Contributor
‎01-23-2020 07:59 AM

Total Access 908e (3rd Gen) P/N: 4243908F1 Firmware

Jump to solution

We have been looking at upgrading the firmware for Total Access 908e (3rd Gen) P/N: 4243908F1. I don't see a link to download 908e firmware but i can download 900e software.

Does the same firmware work for 908e series as well?

0 Kudos
Reply
1 Solution

Accepted Solutions
jayh
Honored Contributor
Honored Contributor
‎01-23-2020 11:39 AM

Re: Total Access 908e (3rd Gen) P/N: 4243908F1 Firmware

Jump to solution

Yes, it's the same software for all variations of the same platform and generation. Generically it's typically called TA900e. The only difference between the TA908e and TA924e, etc. is the number of analog ports on the device. The same firmware will work on any of them.

If you accidentally load firmware for an incompatible unit (for example Gen. 2 firmware on a Gen. 3 device) you'll get a warning that it is not compatible on the GUI. If you have enough flash memory to hold two images it's best to keep your existing working image configured as a secondary boot in case something goes wrong.

View solution in original post

0 Kudos
Reply
2 Replies
jayh
Honored Contributor
Honored Contributor
‎01-23-2020 11:39 AM

Re: Total Access 908e (3rd Gen) P/N: 4243908F1 Firmware

Jump to solution

Yes, it's the same software for all variations of the same platform and generation. Generically it's typically called TA900e. The only difference between the TA908e and TA924e, etc. is the number of analog ports on the device. The same firmware will work on any of them.

If you accidentally load firmware for an incompatible unit (for example Gen. 2 firmware on a Gen. 3 device) you'll get a warning that it is not compatible on the GUI. If you have enough flash memory to hold two images it's best to keep your existing working image configured as a secondary boot in case something goes wrong.

0 Kudos
Reply
vuppandm
New Contributor
‎01-24-2020 02:05 AM

Re: Total Access 908e (3rd Gen) P/N: 4243908F1 Firmware

Jump to solution

Ok Thanks Jay

0 Kudos
Accept as Solution Reply