The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jo_user1
New Contributor

Trying to configure FXS ports to SIP trunk for outbound faxing

Jump to solution

Hello,

This is my first time trying to configure an Adtran gateway. I'm trying to configure all FXS ports in the gateway to connect fax machines which are used only for outbound faxing, all of them have the same outbound DID. The other end of the gateway is a SIP trunk that goes to an Asterisk server, which handles the calls from the gateway.

I already have a different brand gateway doing this task in production that I would like to retire. This gateway is configured so that it doesn't have to register every single FXS port as a user in Asterisk. I would like to accomplish the same with the Adtran unit: take any calls from the FXS ports and send them through the SIP trunk to Asterisk, no registration or authentication.

Below is the configuration I have. When I try to make a call, I get a busy and nothing reaches the Asterisk server. Asterisk shows the trunk to be up.

Any help is appreciated.

! ADTRAN, Inc. OS version A4.11.00.E

! Boot ROM version 14.04.00

! Platform: Total Access 924 (2nd Gen), part number 4212924L1

!

hostname "FXSGW1"

enable password

!

ip subnet-zero

ip classless

ip routing

!

ip domain-proxy

!

no auto-config

!

event-history on

no logging forwarding

no logging email

!

no service password-encryption

!

username "admin" password "password"

!

no ip firewall alg msn

no ip firewall alg mszone

no ip firewall alg h323

no dot11ap access-point-control

!

interface eth 0/1

  ip address  10.3.4.25  255.255.252.0

  media-gateway ip primary

  no shutdown

!

interface t1 0/1

  no shutdown

!

interface t1 0/2

  shutdown

!

interface fxs 0/1

  no shutdown

!

interface fxs 0/2

  no shutdown

!

interface fxs 0/3

  no shutdown

!

interface fxs 0/4

  no shutdown

!

interface fxs 0/5

  no shutdown

!

interface fxs 0/6

  no shutdown

!

interface fxs 0/7

  no shutdown

!

interface fxs 0/8

  no shutdown

!

interface fxs 0/9

  no shutdown

!

interface fxs 0/10

  no shutdown

!

interface fxs 0/11

  no shutdown

!

interface fxs 0/12

  no shutdown

!

interface fxs 0/13

  no shutdown

!

interface fxs 0/14

  no shutdown

!

interface fxs 0/15

  no shutdown

!

interface fxs 0/16

  no shutdown

!

interface fxs 0/17

  no shutdown

!

interface fxs 0/18

  no shutdown

!

interface fxs 0/19

  no shutdown

!

interface fxs 0/20

  no shutdown

!

interface fxs 0/21

  no shutdown

!

interface fxs 0/22

  no shutdown

!

interface fxs 0/23

  no shutdown

!

interface fxs 0/24

  no shutdown

!

ip route 0.0.0.0 0.0.0.0 10.3.4.1 100

!

no ip tftp server

no ip tftp server overwrite

ip http server

ip http secure-server

no ip snmp agent

no ip ftp server

no ip scp server

no ip sntp server

!

ip sip

ip sip udp 5060

no ip sip tcp

!

voice feature-mode network

voice forward-mode network

!

voice codec-list Codecs

  codec g711ulaw

!

voice trunk T01 type sip

  description "FAX lines"

  sip-server primary 10.3.4.31

  sip-server secondary 10.3.4.30

  outbound-proxy primary 10.3.4.31

  outbound-proxy secondary 10.3.4.30

  codec-group Codecs

!

voice grouped-trunk G01

  trunk T01

  accept $ cost 0

!

voice user 7730000000

  connect fxs 0/1

  password "1234"

  no special-ring-cadences

  message-waiting lamp-only

  sip-identity 7730000000 T01

  sip-authentication password "1234"

!

line con 0

  no login

!

line telnet 0 4

  login

  password password

  no shutdown

line ssh 0 4

  login local-userlist

  no shutdown

!

end

Labels (1)
1 Solution

Accepted Solutions
jayh
Honored Contributor
Honored Contributor

Re: Trying to configure FXS ports to SIP trunk for outbound faxing

Jump to solution

Because your FXS lines are all going to use the same DID and are outbound only, you can assign a bogus extension number to each of them and use caller-id-override for the ANI. 

You don't really need SIP identity in this scenario.

voice user 11111

  connect fxs 0/1

  password "1234"

  no special-ring-cadences

  caller-id-override external-number 7730000000

  no message-waiting

  no echo-cancellation

  no call-waiting

  modem-passthrough

voice user 11112

  connect fxs 0/2

  password "1234"

  no special-ring-cadences

  caller-id-override external-number 7730000000

  no message-waiting

  no echo-cancellation

  no call-waiting

  modem-passthrough

voice user 11113

  connect fxs 0/3

password "1234"

  no special-ring-cadences

  caller-id-override external-number 7730000000

  no message-waiting

  no echo-cancellation

  no call-waiting

  modem-passthrough

...and so on

I would put a more specific accept pattern on the grouped-trunk to minimize post-dial delay.

voice grouped-trunk G01

  trunk T01

  accept NXX-XXXX cost 0

  accept 1-NXX-NXX-XXXX cost 0

  accept 011-$ cost 0

  accept 411 cost 0

  accept 611 cost 0

  accept 911 cost 0

reject 976-XXXX

reject 1-900-NXX-XXXX

  reject 1-976-NXX-XXXX

If the calls fail to hit the asterisk server at all, turn on debugging and try to place a call, then paste the output here.

debug voice verbose

debug sip stack messages

View solution in original post

0 Kudos
3 Replies
jayh
Honored Contributor
Honored Contributor

Re: Trying to configure FXS ports to SIP trunk for outbound faxing

Jump to solution

Because your FXS lines are all going to use the same DID and are outbound only, you can assign a bogus extension number to each of them and use caller-id-override for the ANI. 

You don't really need SIP identity in this scenario.

voice user 11111

  connect fxs 0/1

  password "1234"

  no special-ring-cadences

  caller-id-override external-number 7730000000

  no message-waiting

  no echo-cancellation

  no call-waiting

  modem-passthrough

voice user 11112

  connect fxs 0/2

  password "1234"

  no special-ring-cadences

  caller-id-override external-number 7730000000

  no message-waiting

  no echo-cancellation

  no call-waiting

  modem-passthrough

voice user 11113

  connect fxs 0/3

password "1234"

  no special-ring-cadences

  caller-id-override external-number 7730000000

  no message-waiting

  no echo-cancellation

  no call-waiting

  modem-passthrough

...and so on

I would put a more specific accept pattern on the grouped-trunk to minimize post-dial delay.

voice grouped-trunk G01

  trunk T01

  accept NXX-XXXX cost 0

  accept 1-NXX-NXX-XXXX cost 0

  accept 011-$ cost 0

  accept 411 cost 0

  accept 611 cost 0

  accept 911 cost 0

reject 976-XXXX

reject 1-900-NXX-XXXX

  reject 1-976-NXX-XXXX

If the calls fail to hit the asterisk server at all, turn on debugging and try to place a call, then paste the output here.

debug voice verbose

debug sip stack messages

0 Kudos
Anonymous
Not applicable

Re: Trying to configure FXS ports to SIP trunk for outbound faxing

Jump to solution

Jo.user1,

Thanks for posting!  I noticed that you had not replied to the post above, so I just wanted to check back with you and see if you have any further questions.  Just let us know with a reply if you have any further questions or you have an update on the situation.

Thanks!

David

Re: Trying to configure FXS ports to SIP trunk for outbound faxing

Jump to solution

Thanks for the reply. It was helpful.

The command: caller-id-override external-number 7730000000  wouldn't set the outbound CID. I had to enforce that at the Asterisk server.

All is good now.

Thanks.