Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mtr
New Contributor
‎06-10-2018 07:33 PM

Voip router

I have and adtran 908e that we used until now to connect to out PRI T1 port on the phone system

so we have one side the WAN we got in a SIP trunk and on the other side a PRI

now we moved to hosted PBX system

our sonicwall does a very bad job with VoIP SIP NAT i am wondering if we can use the 908e just as router for the VOIP network, how is the NAT with the adtran

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎06-11-2018 10:00 AM

Re: Voip router

you sure can! You can do either Stateful or Transparent proxy. Stateful is where you hosted phones register to the 908e and we proxy them up to the softswitch. Transparent is where the phones register directly to the softswitch.  Hope that helps. See the config guide below for how to configure your unit.

Here is the config guide:

Configuring SIP Proxy in AOS

0 Kudos
Accept as Solution Reply