cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jkesting
New Contributor

providing DID's via SIP

Jump to solution

I have a customer who wants us to take over their PRI, on which they have 100 DID's.  We would have to bring service in on a SIP trunk(s) delivered to a TA908e, which would convert the SIP to PRI. What do I need to do to setup the TA908e to use DID's?

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
unified
Valued Contributor
Valued Contributor

Re: providing DID's via SIP

Jump to solution

If you will be passing all the DIDs to the PBX all you need is an "accept all" rule:

Example (assuming T02 is the PBX):

voice grouped-trunk PRI

  trunk T02

  accept $ cost 0

In the GUI this can be found under Trunk Groups -> The PRI trunk name -> Detailed View - Permit/Restriction Call Templates -> Configure Advanced Templates

In Template enter $ and click "add".

View solution in original post

0 Kudos
2 Replies
unified
Valued Contributor
Valued Contributor

Re: providing DID's via SIP

Jump to solution

If you will be passing all the DIDs to the PBX all you need is an "accept all" rule:

Example (assuming T02 is the PBX):

voice grouped-trunk PRI

  trunk T02

  accept $ cost 0

In the GUI this can be found under Trunk Groups -> The PRI trunk name -> Detailed View - Permit/Restriction Call Templates -> Configure Advanced Templates

In Template enter $ and click "add".

View solution in original post

0 Kudos
david
Valued Contributor
Valued Contributor

Re: providing DID's via SIP

Jump to solution

Jkesting,

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

David