Adtran
Help
Attention! The Adtran support community will be placed in read-only mode on Monday, January 20th, at 8 AM CST for system maintenance. During this time, new posts, replies, or other content updates will be unavailable. The system will return to normal functionality by 9 AM CST on Tuesday, January 21st. If you encounter any product issues during this read-only period, you can reach out to Adtran support at any time. Thank you!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
NetworkTech2016
New Contributor
‎02-01-2024 03:16 PM

Moving configuration from old unit to a new switch

I was looking through the following page and didn't see anything mentioned about SSH keys.
https://supportcommunity.adtran.com/t5/General/Moving-an-ADTRAN-Configuration-Between-AOS-Units/ta-p...

The configuration file has been copied to the new switch and all the settings appear to be correct. Testing the ports shows they are working as expected. While the configuration file appears to show the SSH hashes to allow SSH access, admins are unable to SSH into the new switch. Is there a way to save the SSH data from the old switch and copy that data to the new switch? With multiple admins using SSH to log into the switches, I'd like to save time and avoid installing individual public keys.

0 Kudos
Reply
1 Reply
BMullar
New Contributor III
‎02-19-2024 11:02 AM

Re: Moving configuration from old unit to a new switch

NETWORKTECH2016,

I found the following document on the Support Community:

https://supportcommunity.adtran.com/t5/General/Configuring-SSH-Public-Key-Authentication/ta-p/30898

It looks like the key file can be regenerated using the "ssh key regenerate" command.

Hope this helps.

 

Regards,

BMULLAR

 

0 Kudos
Accept as Solution Reply