BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Networking_Guy
New Contributor II

Adtran 1560 ASE Location for "Description" in OID

Jump to solution

I am having issue with my NMS Auvik finding the interface description I've added from grabbing the SNMP OID. I am not able to find it in the vendor's MIB for this model.

Attached is a snmpwalk my NMS was able to do to find the names of the interfaces, but the descriptions of the interfaces are not there.


Does anyone know which branch this is located in the Adtran NetVanta 1560-48 740W?

0 Kudos
1 Solution

Accepted Solutions

Re: Adtran 1560 ASE Location for "Description" in OID

Jump to solution

In my walk of the switch It is supposed to be IF-MIB::ifAlias  ( OID 1.3.6.1.2.1.31.1.1.1.18)  but it looks like that is not populating correctly. I will open a ticket for it to be investigated which means it will likely be fixed in a future firmware release.

View solution in original post

3 Replies

Re: Adtran 1560 ASE Location for "Description" in OID

Jump to solution

In my walk of the switch It is supposed to be IF-MIB::ifAlias  ( OID 1.3.6.1.2.1.31.1.1.1.18)  but it looks like that is not populating correctly. I will open a ticket for it to be investigated which means it will likely be fixed in a future firmware release.

Re: Adtran 1560 ASE Location for "Description" in OID

Jump to solution

Thank you for looking into this! I appreciate it.

Re: Adtran 1560 ASE Location for "Description" in OID

Jump to solution

I have confirmed this will be in one of the next releases for the ASE switches.